Oil intensifier
Information
An Oil intensifier is used to boost the low-pressure output in the hydraulic
high-power unit. If the oil output of an intensifier is sufficient for clamping elements, the circuit as shown in figure 1 can be used.
If the oil requirement of clamping elements is more than the output
of an intensifier, then the prefill circuit can be used as shown in figure 2.
- Hardened and chromed alloy steel piston rods run longer with less wear
- Special coating on the Oil intensifier helps to prevent rusting and scratching
Specifications
- Minimum operating pressure: 25 Bar
- Maximum operating pressure: 70 Bar
- Operating temperature: 10 - 70 °C
